Ring Resizing
Sizings:
On average a ring sizing will cost from £120 and will take around 3-5 working days.
Same day sizings are available by prior appointment starting from £180. For this your ring will need to be dropped off with us by 10:30 and it will be ready for collection by 17:00.
All of our ring sizings and repairs are carried out in-house in our onsite workshop.
Polishing/Refurbishment:
On average it will cost £80 to make your ring look 'like new'!
Rings sizings and polishing can be carried out the same day with prior booking so you aren't without your jewellery for too long. It is always best to make an appointment; however, you are more than welcome to walk in.
Durrants of London are specialists in bespoke design, creating every single piece using a wealth of knowledge and the client’s ideas. This is made possible by the on-site workshop with extremely skilled craftsman, who have over fifty years worth of experience in the trade, creating striking pieces of the highest quality.
Checking your ring size
Check your ring size using our handy printable finger size guide.
Simply:
-
Download the form using the button below
-
print out the sheet (make sure it is set to 100% size)
-
Cut out the finger strap
-
make a note of your finger size
If you are in doubt of your size pop in to see us and we can measure your finger in-store using our accurate finger sizers.
Download the free printable finger size guide here.
Check your ring size with our Conversion Chart
| Ring Dia ⌀ (Inside) | Ring Circumference (Inside) | ‹ International Standard Sizes › | ||||
| MM | Inches | MM | Inches | UK / AU | USA / CA | Europe |
| 9.9 | 0.390 | 31.1 | 1.22 | · | 0000 | · |
| 10.7 | 0.442 | 33.7 | 1.39 | · | 00 | · |
| 11.5 | 0.454 | 36.2 | 1.43 | · | 0 | · |
| 12.0 | 0.470 | 37.5 | 1.50 | A | 1/2 | · |
| 12.2 | 0.479 | 38.3 | 1.51 | A 1/2 | 3/4 | · |
| 12.4 | 0.487 | 38.9 | 1.53 | B | 1 | · |
| 12.6 | 0.506 | 39.6 | 1.56 | B 1/2 | 1 1/4 | · |
| 12.8 | 0.503 | 40.2 | 1.58 | C | 1 1/2 | · |
| 13.0 | 0.511 | 40.8 | 1.61 | C 1/2 | 1 3/4 | · |
| 13.2 | 0.520 | 41.5 | 1.63 | D | 2 | 41 1/2 |
| 13.4 | 0.528 | 42.1 | 1.66 | D 1/2 | 2 1/4 | · |
| 13.6 | 0.536 | 42.8 | 1.68 | E | 2 1/2 | 42 3/4 |
| 13.8 | 0.544 | 43.5 | 1.71 | E 1/2 | 2 3/4 | · |
| 14.0 | 0.553 | 44.1 | 1.74 | F | 3 | 44 |
| 14.2 | 0.557 | 44.5 | 1.75 | F 1/2 | 3 1/8 | · |
| 14.3 | 0.561 | 44.8 | 1.76 | F 3/4 | 3 1/4 | · |
| 14.4 | 0.565 | 45.1 | 1.77 | G | 3 3/8 | 45 1/4 |
| 14.5 | 0.568 | 45.4 | 1.79 | G 1/4 | 3 1/2 | · |
| 14.6 | 0.573 | 45.7 | 1.80 | G 1/2 | 3 5/8 | · |
| 14.7 | 0.576 | 46.0 | 1.81 | H | 3 3/4 | 46 1/2 |
| 14.9 | 0.585 | 46.7 | 1.84 | H 1/2 | 4 | · |
| 15.0 | 0.592 | 47.3 | 1.86 | I | 4 1/4 | 47 3/4 |
| 15.3 | 0.601 | 48.0 | 1.89 | I 1/2 | 4 1/2 | · |
| 15.4 | 0.606 | 48.4 | 1.90 | J | 4 5/8 | 50 |
| 15.5 | 0.611 | 48.8 | 1.92 | J 1/4 | 4 3/4 | · |
| 15.7 | 0.618 | 50.3 | 1.94 | J 1/2 | 5 | · |
| 15.8 | 0.622 | 50.6 | 1.95 | K | 5 1/8 | 50 |
| 15.9 | 0.625 | 50.0 | 1.97 | K 1/4 | 5 1/4 | · |
| 16.0 | 0.630 | 50.3 | 1.98 | K 1/2 | 5 3/8 | · |
| 16.1 | 0.634 | 50.6 | 1.99 | L | 5 1/2 | 51 3/4 |
| 16.3 | 0.642 | 51.2 | 2.02 | L 1/4 | 5 3/4 | · |
| 16.4 | 0.646 | 51.6 | 2.03 | L 1/2 | 5 7/8 | · |
| 16.5 | 0.650 | 51.9 | 2.04 | M | 6 | 52 3/4 |
| 16.7 | 0.658 | 52.5 | 2.07 | M 1/2 | 6 1/4 | · |
| 16.9 | 0.666 | 53.2 | 2.09 | N | 6 1/2 | 54 |
| 17.1 | 0.674 | 53.8 | 2.12 | N 1/2 | 6 3/4 | · |
| 17.4 | 0.683 | 54.5 | 2.15 | O | 7 | 55 1/4 |
| 17.5 | 0.687 | 54.8 | 2.16 | O 1/2 | 7 1/4 | · |
| 17.8 | 0.698 | 55.8 | 2.20 | P | 7 1/2 | 56 1/2 |
| 18.0 | 0.707 | 56.5 | 2.22 | P 1/2 | 7 3/4 | · |
| 18.2 | 0.716 | 57.1 | 2.25 | Q | 8 | 57 3/4 |
| 18.4 | 0.722 | 57.7 | 2.27 | Q 1/2 | 8 1/4 | · |
| 18.5 | 0.729 | 58.2 | 2.29 | Q 3/4 | 8 1/2 | · |
| 18.6 | 0.733 | 58.5 | 2.30 | R | 8 5/8 | 59 |
| 18.7 | 0.736 | 58.7 | 2.31 | R 1/4 | 8 3/4 | · |
| 18.8 | 0.740 | 59.1 | 2.32 | R 1/2 | 8 7/8 | · |
| 18.9 | 0.743 | 59.3 | 2.35 | R 3/4 | 9 | · |
| 19.1 | 0.752 | 60.0 | 2.36 | S | 9 1/8 | 60 1/4 |
| 19.2 | 0.757 | 60.4 | 2.38 | S 1/4 | 9 1/4 | · |
| 19.3 | 0.760 | 60.7 | 2.39 | S 1/2 | 9 3/8 | · |
| 19.4 | 0.764 | 61.0 | 2.40 | S 3/4 | 9 1/2 | · |
| 19.5 | 0.768 | 61.3 | 2.41 | T | 9 5/8 | 61 1/2 |
| 19.6 | 0.772 | 61.6 | 2.43 | T 1/4 | 9 3/4 | · |
| 19.8 | 0.781 | 62.3 | 2.45 | T 1/2 | 10 | · |
| 20.0 | 0.780 | 62.9 | 2.48 | U | 10 1/4 | 62 3/4 |
| 20.2 | 0.795 | 63.5 | 2.50 | U 1/2 | 10 1/2 | · |
| 20.3 | 0.800 | 63.8 | 2.51 | V | 10 5/8 | 63 |
| 20.4 | 0.805 | 64.2 | 2.53 | V 1/4 | 10 3/4 | · |
| 20.7 | 0.814 | 65.0 | 2.56 | V 1/2 | 11 | · |
| 20.8 | 0.817 | 65.2 | 2.57 | W | 11 1/8 | 65 |
| 20.9 | 0.821 | 65.5 | 2.58 | W 1/4 | 11 1/4 | · |
| 20.9 | 0.824 | 65.8 | 2.59 | W 1/2 | 11 3/8 | · |
| 21.0 | 0.830 | 66.2 | 2.61 | W 3/4 | 11 1/2 | · |
| 21.2 | 0.834 | 66.5 | 2.62 | X | 11 5/8 | 66 1/4 |
| 21.2 | 0.836 | 66.7 | 2.63 | X 1/4 | 11 3/4 | · |
| 21.3 | 0.838 | 66.9 | 2.64 | X 1/2 | 11 7/8 | · |
| 21.5 | 0.846 | 67.5 | 2.66 | Y | 12 | 67 1/2 |
| 21.7 | 0.854 | 68.1 | 2.68 | Y 1/2 | 12 1/4 | · |
| 21.9 | 0.861 | 68.8 | 2.71 | Z | 12 1/2 | 68 3/4 |
| 22.1 | 0.870 | 69.4 | 2.73 | Z +1/2 | 12 3/4 | · |
| 22.3 | 0.879 | 70.2 | 2.76 | Z+1 | 13 | · |
| 22.6 | 0.890 | 71.0 | 2.80 | Z+1.5 | 13.5 | · |
| 22.7 | 0.893 | 71.3 | 2.81 | Z+2 | · | · |
| 22.9 | 0.902 | 72.0 | 2.83 | Z+2.5 | · | · |
| 23.0 | 0.908 | 72.5 | 2.85 | Z+3 | · | · |
| 23.3 | 0.915 | 73.0 | 2.87 | Z+3.5 | · | · |
| 23.5 | 0.924 | 73.7 | 2.90 | Z+4 | · | · |
| 23.6 | 0.927 | 74.0 | 2.91 | Z+4.5 | · | · |
| 23.9 | 0.940 | 75.0 | 2.95 | Z+5 | · | · |
| 24.3 | 0.955 | 76.2 | 3.00 | Z+6 | · | · |
